top of page

Load data for .221 Rem. Fireball + .224 | 55gr | Sierra FMJBT GameKing

Recommended Powder(s): ADI AR 2207, Vihtavuori N120

.221 Rem. Fireball + .224 | 55gr | Sierra FMJBT GameKing

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 55gr | Sierra FMJBT GameKing
Manufacturer SKU:
1355
Bullet Weight:
55gr | 3.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.738" | 18.7mm
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.332" | 8.4mm
Shank Seated Depth:
0.228" | 5.8mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B5740_C125
Last updated:
2025-02-02
Recommended Twist Rate:
1:11 - 1:10

Load data for 26 loads in caliber .221 Rem. Fireball with .224 | 55gr | Sierra FMJBT GameKing bullet and 13 powders such as ADI AR 2207, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
96%
39682
86%
**76
99%
[Accurate 1680]*
<<locked>>
86%
40176
87%
**84
93%
[Alliant Reloder-10x]*
<<locked>>
96%
32474
70%
**18
93%
Alliant Reloder-7
<<locked>>
94%
39436
85%
**10
96%
IMR 4198
<<locked>>
95%
35824
77%
**25
95%
IMR 4227
<<locked>>
88%
40524
87%
**87
98%
Lovex S053
<<locked>>
89%
40176
87%
**80
100%
Norma 200
<<locked>>
95%
35824
77%
**90
95%
ReloadSwiss RS 14
<<locked>>
96%
26324
57%
**45
100%
ReloadSwiss RS 36
<<locked>>
89%
39508
85%
**07
98%
SNPE Vectan BA6 1/2
<<locked>>
92%
40132
86%
**62
100%
Vihtavuori N110
<<locked>>
83%
39320
85%
**25
100%
Vihtavuori N120 👍
<<locked>>
96%
37608
81%
**87
99%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2207]*
<<locked>>
81%
24874
54%
**02
94%
[Accurate 1680]*
<<locked>>
83%
35621
77%
**92
91%
[Alliant Reloder-10x]*
<<locked>>
92%
28921
62%
**26
91%
[Alliant Reloder-7]*
<<locked>>
81%
26614
57%
**92
90%
[IMR 4198]*
<<locked>>
85%
27108
58%
**82
90%
IMR 4227
<<locked>>
81%
32068
69%
**97
95%
Lovex S053
<<locked>>
81%
31691
68%
**00
99%
[Norma 200]*
<<locked>>
85%
25454
55%
**18
90%
ReloadSwiss RS 14
<<locked>>
85%
22408
48%
**47
100%
ReloadSwiss RS 36
<<locked>>
81%
31546
68%
**26
95%
SNPE Vectan BA6 1/2
<<locked>>
81%
29994
65%
**65
100%
Vihtavuori N110
<<locked>>
81%
37173
80%
**82
100%
Vihtavuori N120
<<locked>>
81%
23728
51%
**23
95%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page